Why Simple Pump?
Simple Pump Co., LLC has been manufacturing quality shallow well and deep well pumps for over 20 years. Here are a few of the reasons our customers have made us one of the best well pump manufacturers in the USA.
Manufactured to Last
The Simple Pump is CNC-machined in the USA out of aluminum and stainless steel that resists corrosion.
Our hand well pump has a lifetime warranty in case of manufacturing defects, any part will be replaced and shipped in the continental U.S. at no charge.
When you depend on a pump, it should function under all conditions.
Our deep well hand pump doesn't freeze during your ice storm.
Safe Drinking Water Act
We comply with the U.S. Safe Drinking Water Act to make sure our pump doesn't contaminate the water it delivers to you.
Approved by the US National Park Service for installation in National Parks.
Approved by the US Forest Service for installation in National Forests.
PVC drop pipe that prevents chemical reactions to many types of pumped liquids.
We designed it as an easy DIY installation, but we have an extensive dealer network if you want to make the installation easy.
Designed to Work
Pumps water as deep as 325 feet of static water. Pumps into your pressure tank, even from deep wells!
Fits in Most Wells
Small diameter pump system that easily installs in as small as a 2″ well casing.
Our pump fits next to your submersible pump to give you the perfect backup pump in emergencies.
Best Value and Quality
High quality usually comes at a high price, but since we manufacture the majority of our products in-house, we can pass on that cost savings to our customers.
No Power Bill
Your power or solar power. Our pump options allow for remote, unattended operation without the need for costly electricity from the power grid.
We offer a friends and family discount. Buy 2 or more pumps at the same time and get a group discount! Ask us today about being a group coordinator!
Just two of many stories from our customers.
The Worst Ice Storm
Now I'm Prepared
Tell us about your well and we'll design the best pump system for you.
This is free without any obligations to purchase.
Frequently asked questions
Here are a few of the questions we frequently get asked.
The Simple Pump deep well hand pump can be installed in a well of a few feet to hundreds of feet deep. The static water level needs to be at most 325 feet deep for the Simple Pump to be able to lift water without the water being to heavy to hand lift.
Yes, a working submersible pump can be installed next to the Simple Pump deep well hand pump. In this setup, it is preferable to have the Simple Pump as a backup pump in case your submersible pump breaks down or loses power due to weather or another factor.
In the well, drop pipes for the Simple Pump and the submersible pipe are put side by side. With the Simple Pump, you may keep using the submersible pump in your current configuration. In the event that you lose electricity or your submersible pump breaks down, the Simple Pump enables you to access your well water.
The Simple Pump works in conjunction with your submersible but is a totally different technology. Because our pipe contains a number of rods connecting the lever arm at the top to the pump piston and a cylinder at the bottom, we are unable to use the submersible pipe pitless connection.
There must be a method for releasing the water in the Simple Pump drop pipe through the casing's side. Our specifically designed pitless adaptor makes it possible to pump from the top while channeling the water to the pitless piping.
Once the pipe has been positioned sideways outside the well casing, it is simple to connect it to the pipe coming from the submersible at a T junction so that one pipe runs beneath your house. The running pump cannot pump water down the other branch to the other pump because each branch of the T contains a one-way check valve.
The Simple Pump Deep well pump system's largest part measures roughly 1.75′ inches in outer diameter.
The Simple Pump can be installed in a well casing with an internal diameter of 2 inches as a standalone application.
In the vast majority of wells 4 inches or larger, the Simple Pump can be installed alongside an existing submersible pump.
Yes, even from a deep well, the Simple Pump deep well hand well pump can pump water into your home's pressure tank.
The Simple Pump hand pump is designed and made to be sturdy and capable of manually pumping water into your pressure tank. The Simple Pump is machined from a stainless steel billet to provide a lightweight and sturdy pump capable of this pumping performance. The weight of the pump system is crucial to the amount of leverage and strength necessary to hand pump into a pressure tank.
The Simple Pump must be configured to pump into pressure tanks and other pressure connections, and the pressure gauge/check valve combination prevents pressure push-back.
Still have questions?
Let us know what you have a question about.